ᱜᱞᱩᱠᱚᱡᱽ ᱟᱨ ᱢᱮᱠᱟᱱᱤᱠᱟᱞ ᱜᱩᱱ ᱠᱚ ᱨᱮᱭᱟᱜ ᱢᱮᱠᱟᱱᱤᱡᱽᱢ ᱠᱚ ᱞᱟᱹᱜᱤᱫ

1. The circular bottom furnace and reasonable burner configuration are adopted. The furnace gas circulation is strong, the furnace temperature is uniform, and there is no local overheating and over-burning phenomenon. The product quality is improved and the service life of the furnace is extended.
2. Shaft furnace: the furnace charge fully absorbs the waste heat of flue gas in the shaft furnace, reduces the temperature of flue gas at the top of the furnace, and greatly improves the thermal efficiency. When the furnace charge enters the bottom furnace, it has been preheated to the near melting state, ensuring a high melting rate and low energy consumption.
3. The air preheater and furnace shell sandwich air duct are adopted: the air preheater absorbs the waste heat of flue gas well, and the preheated air enters the furnace shell sandwich air duct to further preheat and heat up, which can relatively improve the ambient temperature and reduce the heat dissipation of the furnace shell. The preheated air can improve the combustion efficiency, ᱵᱮᱥ ᱜᱮ, ᱦᱚᱭ ᱦᱤᱥᱤᱫ ᱟᱨ ᱵᱷᱟᱞᱵᱷ ᱨᱮᱭᱟᱜ ᱥᱯᱤᱰ ᱟᱨ ᱵᱷᱟᱞᱵᱷ ᱫᱚ ᱵᱷᱟᱞᱵᱷ ᱟᱨ ᱵᱷᱟᱞᱵᱷ, ᱵᱷᱟᱞᱵᱷ ᱟᱨ ᱵᱷᱟᱞᱵᱷ ᱵᱷᱟᱞᱵᱷ ᱒.᱐ ᱨᱮ ᱧᱮᱞᱚᱜ-ᱟ ᱾
{0.0 ᱫᱚ ᱢᱤᱫ ᱥᱴᱨᱤᱝ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱥᱟᱱᱟᱢ ᱠᱚ ᱧᱩᱛᱩᱢ ᱟᱨ ᱢᱟᱨᱥᱟᱞ ᱠᱚ ᱞᱟᱹᱜᱤᱫ, ᱡᱟᱦᱟᱸ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱ ᱫᱩᱣᱟᱹᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱧᱩᱛᱩᱢ ᱠᱚ ᱫᱚ ᱵᱟᱝ ᱦᱩᱭᱩᱜ-ᱟ; lạgit̕ kạmi lạgit̕ kạmi lạgit̕ lạgit̕ kạmi lạgit̕ lạgit̕ kạmi lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ kạmi lạgit̕ kạmi lạgit̕, ᱟᱨ lạgit̕ lạgit̕ lạgit̕ lạgit̕ kạmi lạgit̕, https lạgit̕, ᱟᱨ ᱚᱱᱟ ᱫᱚ , ᱚᱱᱟ ᱫᱚ 10 ms ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱠᱟᱱᱟ᱾
5. Furnace top charging: convenient charging, low labor intensity, small furnace temperature fluctuation, long furnace life, charging does not take up melting time.
6. The high-efficiency energy-saving burner is used as the heat source, which has the characteristics of easy ignition, fast temperature rise, high injection rate, safe combustion, and small air excess coefficient.